SOLO model – an autonomously operating, quiet, and highly efficient mini heat recovery ventilator designed for ventilating a single room. It does not require constant control, can be connected to a dew point controller or a radon monitor, and the Solo+ collection, when combined with a timer module, can ensure an optimal cross-ventilation effect.

This model is especially suitable for bedrooms, studies, and other separate rooms where fresh air is needed without complex ducting or expensive systems.

Made in Italy!

What’s included

• 2 pcs. G3 filters

• Minimalist external hood

• Mounting sleeve

• User manual

• Remote control

Key features

Autonomous operation

• The SOLO model operates independently—no manual settings required.

• If necessary, it can be connected to a dew point controller, radon monitor, or timer.

Efficient heat recovery

• Ceramic heat exchanger with up to 93% efficiency

• Alternating supply and exhaust mode

• No condensate drainage required

Filtration system

• Two separate G3-class filters for both intake and exhaust air

• Easy to remove and washable

• 2 filters included

Installation and construction

• Mounted in the building’s exterior wall

• PVC sleeve up to 500 mm (can be shortened to 250 mm)

• Suitable for walls 400–500 mm thick

• Exhaust air can be ducted up to 3 meters (without bends) or up to 2,5 m with a 90° elbow

• High-quality, durable, and aesthetically pleasing construction

Quiet and economical

• Electronically commutated (brushless) motor

• Low energy consumption

• Ultra-quiet operation—just 20 dB(A) at minimum speed

Capacity and applications

• Air volume: up to 60 m³/h

• One unit is suitable for a ~30 m² space

• An excellent choice for small rooms, apartments, offices, public spaces

Controls

• The unit can be switched on/off using the switch on the housing or with the remote control

• 3 speed settings selectable via the remote

• In a power outage, the unit closes automatically, and when power is restored it resumes operating at the previously set speed

Installation recommendations

• If installing multiple units, it is recommended to place them as far apart as possible to ventilate the entire space effectively

• One SOLO covers about 30 m²

How does it work?

The mini heat recovery ventilator stores heat in the ceramic heat exchanger while extracting air. When the cycle switches, the supplied outdoor air passes through the heated heat exchanger and warms up, so warm, fresh air returns to the rooms.
This is a simple, efficient ventilation system that requires no ductwork.

Technical data